Eventech
Lidar Specilized Timing Module (LSTM)

The LSTM is intended for applications requiring very accurate time interval measurements (LiDAR and Altimtrry systems, but not limited to). The measurement is performed by registering the moments of events corresponding to the start and stop signals of the time interval. Accuracy is achieved through the use of an interpolator, which generates an analog signal of a known shape at the time of an event and performs AD conversion of this signal. The analog waveform is determined during the calibration procedure.

The developed meter is designed as a universal measuring module, which can be included in various applications operating in space, and requiring measurement of time intervals with high accuracy and low dead time. Engineering Model of LSTM contains several systems of parametric stabilization, which allows maintaining high metrological characteristics in conditions of fluctuations in external temperatures from -40C ° to + 60C ° and radiation up to 100 Krad.

The Engineering Model of LSTM is small in size and low in power consumption and can be easily reconfigured for specific missions. Currently LSTM is used in HERA mission.

 

Main characteristics of BB2

Two measuring inputs A and B: LVDS levels

Minimum measurable time interval: 60 ns

Maximum measurable time interval: Tmax up to 167 ms

Precision - <10 ps (RMS)

Accuracy: depends on Tmax and the class of the internal clock generator used (for XO clock generator: Tmax X ± 50 ppm)

Communication interface: RS-422

External power supplies: + 3.3V, ± 5V

Power consumption: ≤4 W

Working temperature range: -40C ° ÷ + 60C °

Radiation level: up to 100Krad

Dimensions: 154x131.5 mm

Eventech news

Eventech will be participating at several key industry events during October (17 October - 29 October). The trip to Dubai will start with visiting EXPO 2020, where Eventech's technology will be present at Latvian booth zone. Later representatives of the Company will participate at GITEX forum  to find out more about Quantum technologies. Last but not least, The IAC conference will take

Read more

Eventech (LV) together with the partner The Paradigm Factor (UK) published article about Correlation Wind LiDAR with PMT Array Detector and Photon Counting. The CWL LiDAR technique with DSP processing has demonstrated that it can provide atmospheric winds, offering significant system simplifications in terms of Hardware, Software & Processing than a DWL. These preliminary results show that

Read more

Eventech contacts

Pulka iela 3, Riga, LV-1007, Latvia
Tel.: +371 20385066
Fax.: +371 67751956
info@eventechsite.com Contact us